Crankshaft Pulley
Crank PulleyREMOVAL
NOTE:
When replacing the single part, perform the work with the engine installed to body.
1) Remove the V-belts.
2) Remove the crank pulley cover.
3) Remove the crank pulley bolt. To lock the crankshaft, use ST.
ST1 18355AA000 PULLEY WRENCH
ST2 18334AA000 PULLEY WRENCH PIN SET
4) Remove the crank pulley.
INSTALLATION
1) install the crank pulley.
2) Install the crank pulley bolt. To lock the crankshaft, use ST.
ST1 18355AA000 PULLEY WRENCH
ST2 18334AA000 PULLEY WRENCH PIN SET
1) Clean the crankshaft thread using compressed air.
2) Apply engine oil to the crank pulley bolt seat and thread.
3) Tighten the crank pulley bolts.
3) Install the crank pulley cover.
NOTE:
Assemble the O-ring to crank pulley cover.
4) Install the V-belts.
INSPECTION
1) Check the crank pulley cover for oil and air leakage.
2) Check the crank pulley for looseness.