With Manufacturer's Scan Tool
OPERATION1. SUBARU SELECT MONITOR (NORMAL MODE)
1. On the [[Main Menu]], select {Each System Check}.
2. On the [[System Selection Menu]], select {Engine Control System}.
3. Click the [OK] key after the information regarding engine type has been displayed.
4. On the [[Engine Diagnosis]] display screen, select {Diagnostic Code(s) Display}.
5. On the [[Diagnostic Trouble Code]] screen, select {Temporary Diagnostic Code(s)} or {Memorized Diagnostic Code(s)}.
NOTE:
- For detailed operation procedure, refer to the "PC application help for Subaru Select Monitor".
- For details concerning DTC, refer to List of Diagnostic Trouble Code (DTC). List of Diagnostic Trouble Code (DTC)
2. SUBARU SELECT MONITOR (OBD MODE)
1. On the [[Main Menu]], select {Each System Check}.
2. On the [[System Selection Menu]], select {Engine Control System}.
3. Click the [OK] key after the information regarding engine type has been displayed.
4. On the [[Engine Diagnosis]] display screen, select the {OBD System}.
5. On the [[OBD Menu]] display screen, select the {Diagnostic Code(s) Display}.
6. Make sure DTC is shown on the screen.
NOTE:
- For detailed operation procedure, refer to the "PC application help for Subaru Select Monitor".
- For details concerning DTC, refer to List of Diagnostic Trouble Code (DTC). List of Diagnostic Trouble Code (DTC)