With Manufacturer's Scan Tool

Read Diagnostic Trouble Code (DTC)

OPERATION

1. SUBARU SELECT MONITOR (NORMAL MODE)
1. On {{Main Menu}} display, select {Each System Check}.
2. On {{System Selection Menu}} display, select {Engine Control System}.
3. Click the [OK] button after the information of engine type has been displayed.
4. On {{Engine Diagnosis}} display, select {Diagnostic Code(s) Display}.
5. On {{Diagnostic Code(s) Display}} display, select {Temporary Diagnostic Code(s)} or {Memorized Diagnostic Code(s)}.

NOTE:
- For detailed operation procedures, refer to "PC application help for Subaru Select Monitor".
- For details concerning DTC, refer to "List of Diagnostic Trouble Code (DTC)". List of Diagnostic Trouble Code (DTC)

2. SUBARU SELECT MONITOR (OBD MODE)
1. On {{Main Menu}} display, select {Each System Check}.
2. On {{System Selection Menu}} display, select {Engine Control System}.
3. Click the [OK] button after the information of engine type has been displayed.
4. On {{Engine Diagnosis}} display, select {OBD System}.
5. On {{OBD Menu}} display, select {Diagnostic Code(s) Display}.
6. Make sure DTC is shown on the screen.

NOTE:
- For detailed operation procedures, refer to the "PC application help for Subaru Select Monitor".
- For details concerning DTC, refer to "List of Diagnostic Trouble Code (DTC)". List of Diagnostic Trouble Code (DTC)