Seats: Testing and Inspection
INSPECTION1. WIRING DIAGRAM
Refer to "Power Seat".
- Driver's seat (without memory).
- Driver's seat (with memory).
- Passenger's seat.
2. NOTE
3. TROUBLE SYMPTOM
- Without memory function
- With memory function
4. CHECK POWER SEAT SWITCH
- Without memory function
Measure resistance between terminals while operating each switch.
- Driver's seat
- Passenger's seat
Replace the power seat switch if the inspection result is not within the standard value.
- With memory function
Measure resistance between terminals while operating each switch.
Replace the power seat switch if the inspection result is not within the standard value.
5. CHECK LUMBAR SWITCH
Measure resistance between terminals while operating each switch.
Replace the lumbar switch if the inspection result is not within the standard value.
6. CHECK MEMORY SWITCH (WITH MEMORY FUNCTION)
Measure resistance between terminals while operating each switch.
Replace the memory switch if the inspection result is not within the standard value.
7. ALL FUNCTIONS DO NOT OPERATE (WITHOUT MEMORY)
8. SOME MOTORS DO NOT OPERATE (WITHOUT MEMORY)
- Slide operation failure
- Malfunction of tilt operation
- Malfunction of lifter operation
- Malfunction of reclining operation
- Malfunction of lumbar operation
9. IT DOES NOT FUNCTION WITH MANUAL OPERATION (WITH MEMORY)
10. SOME MOTORS DO NOT OPERATE (WITH MEMORY)
- Slide operation failure
- Malfunction of tilt operation
- Malfunction of lifter operation
- Malfunction of reclining operation
- Malfunction of lumbar operation
11. UNABLE TO SET POSITIONS INTO MEMORY (WITH MEMORY)
12. UNABLE TO PERFORM THE RELOADING OPERATION (DRIVER'S SEAT WITH MEMORY)
13. NO INTERLOCK WITH SMART KEYLESS
14. UNABLE TO PERFORM INITIALIZATION
