Heater and Ventilation Construction

General Description




Heater and Ventilation construction
The heater and ventilation of this vehicle consists of such main components as control levers (9), mode control switch (17), mode actuator (18), blower motor unit (8), heater unit (6) and air ducts (7). The blower motor runs on electricity to send air inside. In the heater core, the cooling water warmed by the engine keeps circulating. Each control lever controls the blower motor speed, temperature and fresh air/circulation selection respectively. The mode control switch is used to control the dampers in the heater unit by means of the mode actuator so that the air is let out through the outlets as needed. Through the rear duct (13), air is drawn into the rear seat foot space.