DTC Clearance

DTC Clearance

WARNING:
When performing a driving test, select a safe place where there is neither any traffic nor any traffic accident possibility and be very careful during testing to avoid occurrence of an accident.

After repair or replace malfunction parts), clear all DTCs by performing the following procedure or using SUZUKI scan tool.
1) Connect SUZUKI scan tool to DLC in the same manner as when making this connection for DTC check.
2) Turn ignition switch to ON position.
3) Erase DTC according to instructions displayed on scan tool.
4) After completing the clearance, turn ignition switch OFF and disconnect SUZUKI scan tool from DLC.
5) Perform "Driving Test" (Step 2 of Electronic Stability Program Check) and DTC Check and confirm that NO DTC is displayed on SUZUKI scan tool.