Scan Tool Data
Scan Tool DataESP(R) Control Module
The parameter data below are values measured with the SUZUKI scan tool when the normally operating vehicle is under the following conditions. When taking measurements for comparison by using the SUZUKI scan tool, be sure to check that the vehicle is under the following conditions.
^ Parking brake is applied and wheels are blocked.
^ Ignition switch is at ON position.
^ Air conditioner is turned OFF (if equipped).
^ No load is applied to power steering (if equipped). (Do not turn it)
^ Set the wheel in straight-ahead position and hands off steering wheel.
^ All electric loads are turned OFF (except ignition).
^ No DTC is detected.
