Fog/Driving Lamp: Service and Repair

Front Fog Light Removal and Installation (If Equipped)

WARNING:
- To avoid danger of being burned, don't touch when the bulb is hot.
- Don't touch glass surface of bulb to avoid deteriorate as the case may be unclear when bulb light on at dirty condition.

Removal
1. Disconnect negative (-) cable at battery.
2. Remove front bumper. Refer to Front Bumper and Rear Bumper Components.
3. Disconnect coupler from fog light assembly (1).
4. Remove front fog light as follows.

Hatchback
- Detach fog light pushing clips to arrow direction, and remove front fog light.






Sedan
- Remove fog light screws (2), and remove front fog light.






Installation
Reverse removal procedure for installation nothing the following:
- After installing, adjust aiming referring to Front Fog Light Aiming Adjustment with Screen (If Equipped).