Air Flow Meter/Sensor: Service and Repair

Mass Air Flow (MAF) & Intake Air Temperature (IAT) Sensor Removal and Installation

CAUTION:
When servicing MAF & IAT sensor, be sure to observe the following items.
- Do not expose MAF & IAT sensor to any shock. If it has been dropped, it should be replaced.

Removal
1. Disconnect negative cable from battery.
2. Disconnect MAF & IAT sensor connector.
3. Remove MAF & IAT sensor (1) from air cleaner case.







Installation
Reverse removal procedure noting the following.
- Tighten MAF & IAT sensor screws to specified torque.

Tightening torque
MAF & IAT sensor screw (a): 1.2 N.m (0.12 kg-m, 0.9 lbf-ft)