Right Case Disassembly and Reassembly
Right Case Disassembly and ReassemblyReference: Manual Transaxle Unit Dismounting and Remounting
Reference: Manual Transaxle Assembly Components
Disassembly
1) Remove differential side oil seal from right case, if necessary.
2) Remove differential side bearing outer race (1) using brass bar (2), if necessary.
3) Remove input shaft oil seal using special tool, if necessary.
Special Tool
(A): 09913-75830
4) Break oil channel (1) with a flat end rod or the like and remove it in order to install special tool to countershaft right bearing outer race.
5) Remove countershaft right bearing outer race using special tools, if necessary.
Special Tool
(A): 09942-15511
(B): 09944-96011
Reassembly
1) Install new input shaft oil seal facing its spring side upward until it becomes flush with case surface, if removed. Use special tool and hammer for installation and apply grease to oil seal lip.
: Grease 99000-25011 (SUZUKI Super Grease A)
Special Tool
(A): 09913-76010
2) Install countershaft left bearing outer race and new countershaft oil channel using special tool, if removed.
Special Tool
(A): 09913-85210
3) Install differential side bearing outer race using special tools and hammer, if removed.
Special Tool
(A): 09924-74510
(B): 09925-14520
4) Install new differential side oil seal to right case, if removed.