C1027

DTC C1027

DTC Detecting Condition and Trouble Area






Circuit Diagram










DTC Troubleshooting


1. Was "ESP (R) System Check" performed?
YES
Go to Step 2.
NO
Go to ESP System Check ESP (R) System Check.
2. ESP (R) OFF switch check
Confirm that ignition mode of keyless push start system is in "OFF".
Remove ESP (R) OFF switch. ESP OFF Switch Removal and Installation
Check each terminal of ESP (R) OFF switch for proper connection.
If connection are OK, check ESP (R) OFF switch. ESP OFF Switch Inspection
Is it in good condition?
YES
Go to Step 3.
NO
Replace ESP (R) OFF switch.
3. ESP (R) OFF switch circuit check
Disconnect "E09" connector.
Check for proper connection to "E09-30" terminal.
If connection is OK, check resistance between "E09-30" terminal and ground.
Is resistance infinite?
YES
Substitute a known-good ESP (R) control module and recheck DTC. ESP Hydraulic Unit / Control Module Assembly Removal and Installation
NO
"GRY" wire circuit is shorted to ground.