Power Door Mirror Removal and Installation

Power Door Mirror Removal and Installation

Removal

Power Door Mirror On-Vehicle Inspection
1) Remove front door trim. Front Door Glass Removal and Installation
2) Disconnect power door mirror connector (1).
3) Remove power door mirror nuts (2) and remove power door mirror (3).











Installation

Reverse removal procedure noting the following points.

- Insert claws (2) securely when installing mirror (1).
- Check operation of power door mirror after installation.
- Tighten power door mirror nuts in order ("1" to "3") to specified torque.

Tightening torque
Power door mirror nut (a): 11 Nm (1.1 kgf-m, 8.5 lbf-ft)