Instrument Cluster / Carrier: Service and Repair

Combination Meter Removal and Installation

1) Remove floor console front garnish. Center Console Box Removal and Installation
2) Remove audio unit. Service and Repair
3) Remove column hole blind holder. Steering Wheel and Column Components
4) Remove driver side instrument panel undercover (2) and, while supporting it, disconnect connector (1).





5) Remove screws (1) and remove steering column hole cover (2).





6) Remove screws (1) and remove instrument panel center lower box (2).





7) Remove instrument panel switch bezel (1), and then remove driver side instrument panel outside garnish (2).





8) Remove driver side instrument panel inside garnish (1), and then remove instrument panel cluster panel (2).





9) Remove screws (1) and remove combination meter (2).
10) Release lock (3) and disconnect combination meter connector (4).






Installation

Reverse removal procedure.