Right Case Disassembly and Reassembly

Right Case Disassembly and Reassembly

Manual Transaxle Unit Dismounting and Remounting

Manual Transaxle Assembly Components

Disassembly

1) Remove differential side oil seal from right case, if necessary. Service and Repair
2) Remove differential side bearing outer race (1) using brass bar (2), if necessary.





3) Remove input shaft oil seal using special tool, if necessary.
Special Tool

(A): 09913-75830





4) Break oil channel (1) with flat-bladed screwdriver or the like and remove it.





5) Remove countershaft right bearing outer race using special tools, if necessary.
Special Tool

(A): 09942-15511

(B): 09944-96011





Reassembly

1) Install new input shaft oil seal facing its spring side upward until it becomes flat with case surface, if removed. Use special tool and hammer for installation and apply grease to oil seal lip.

Grease: 99000-25011 (SUZUKI Super Grease A)

Special Tool

(A): 09913-76010





2) Install countershaft right bearing outer race and new countershaft oil channel using special tool, if removed.
Special Tool

(A): 09913-85210





3) Install differential side bearing outer race using special tools and hammer, if removed.
Special Tool

(A): 09924-74510

(B): 09925-14520





4) Install new differential side oil seal to right case, if removed. Service and Repair