Technician Safety Information

Precautions for Body, Cab and Accessories

General Precautions

Refer to General Precautions General Precautions.

Precautions for Electrical Circuit Service

Refer to Precautions for Electrical Circuit Service Precautions for Electrical Circuit Service.

Fastener Caution

Refer to Fastener Caution Fastener Caution.

Precautions for Servicing 4WD Model

Refer to Precautions for Servicing 4WD Model.

Air Bag Warning

Refer to Air Bag Warning Air Bag Warning.

Precautions for Vehicle Equipped with Supplemental Restraint (Air Bag) System

Refer to Precautions for Vehicle Equipped with ESP System Precautions for Vehicle Equipped with ESP(R) System.

Reassembling Note for Wiring Harness

Be sure to observe Reassembling Note for Wiring Harness Reassembling Note for Wiring Harness
whenever installing wiring harness. Otherwise, electrical trouble may occur.

Precautions for CAN Communication System

Refer to Precautions for CAN Communication System Precautions for CAN Communication System.

Precautions for Diagnosing Trouble

- Observe the following or memorized diagnosis code may be deleted.

- Do not disconnect the system connector.
- Do not disconnect negative (-) cable at the battery.
- Do not disconnect the system grounding.
- Do not disconnect the system fuse.
- Do not push engine switch to change ignition mode to OFF during troubleshooting.

- Before using scan tool, read its "Operator's (Instruction) Manual" to know how to use it.
- Be sure to clear all DTCs after completing troubleshooting.