Removal

LIGHTING: HEADLIGHT ASSEMBLY: REMOVAL

HINT
* Use the same procedure for both the RH and LH sides.
* The procedure described below is for the LH side.

1. REMOVE FRONT BUMPER COVER

Removal

2. REMOVE HEADLIGHT ASSEMBLY

(a) Remove the bolt and 2 screws.

(b) Disengage the clamp and disconnect the 3 connectors to remove the headlight assembly.

3. REMOVE FRONT TURN SIGNAL LIGHT BULB

(a) Turn the front turn signal light socket with the bulb in the direction indicated by the arrow in the illustration to remove them.

(b) Remove the front turn signal light bulb from the front turn signal light socket.

4. REMOVE CLEARANCE LIGHT BULB

(a) Turn the clearance light socket with the bulb in the direction indicated by the arrow in the illustration to remove them.

(b) Remove the clearance light bulb from the clearance light socket.

5. REMOVE NO. 1 HEADLIGHT BULB

(a) Remove the socket cover.

(b) Release the set spring lock as shown in the illustration.

NOTICE:
Do not touch the bulb glass with your fingers.