Installation

LIGHTING: REAR COMBINATION LIGHT ASSEMBLY: INSTALLATION

1. INSTALL REAR COMBINATION LIGHT SOCKET AND WIRE SUB-ASSEMBLY (for Bulb Type Stop Light)

(a) Engage the clamp and the guide to install the rear combination light socket and wire sub-assembly.

2. INSTALL REAR COMBINATION LIGHT SOCKET AND WIRE SUB-ASSEMBLY (for LED Type Stop Light)

(a) Connect the connector.

(b) Turn the tail and stop light socket of the rear combination light socket and wire sub-assembly in the direction indicated by the arrow in the illustration to install them.





Text in Illustration





(c) Engage the clamp and the guide to install the rear combination light socket and wire sub-assembly.

3. INSTALL TAIL AND STOP LIGHT BULB (for Bulb Type Stop Light)

(a) Install the tail and stop light bulb into the rear combination light socket and wire sub-assembly.





(b) Turn the rear combination light socket and wire sub-assembly with the bulb in the direction indicated by the arrow in the illustration to install them.

4. INSTALL BACK UP LIGHT BULB

(a) Install the back up light bulb into the rear combination light socket and wire sub-assembly.





(b) Turn the rear combination light socket and wire sub-assembly with the bulb in the direction indicated by the arrow in the illustration to install them.

5. INSTALL REAR TURN SIGNAL LIGHT BULB

(a) Install the rear turn signal light bulb into the rear combination light socket and wire sub-assembly.





(b) Turn the rear combination light socket and wire sub-assembly with the bulb in the direction indicated by the arrow in the illustration to install them.

6. INSTALL REAR COMBINATION LIGHT ASSEMBLY

(a) Connect the connector, and then install the rear combination light assembly with the 2 bolts.

Torque : 5.4 Nm (55 kgf-cm, 48 in-lbf)