Mechanical Specifications

Firing Order 1-5-3-6-2-4

Idle Speed 650 rpm [1]
Idle Mixture [1]

DP Setting Speed 2,000 rpm [2]

[1] Not Adjustable.
[2] Refer to ADJUSTMENT PROCEDURES.

Port Fuel Injector Volume 101 - 114cc (6.2 - 7.0 cu in.) per 15 sec.

TURBOCHARGER IMPELLER WHEEL (SHAFT):

Axial Play 0.0051 in. (0.13mm) or less
Radial Play 0.0071 in. (0.18mm) or less

EFI TIGHTENING TORQUE:

Cold Start Injector Fuel Pipe 13 ft.lbs. (18 N-m)
Cold Start Injector Mounting Bolts 22 ft.lbs. (29 N-m)
Filler Pipe Flange To Tank Bolts 2.5 ft.lbs. (3.4 N-m)
Fuel Lines To Fittings 22 ft.lbs. (30 N-m)
Fuel Pressure Regulator Mounting Bolts 18 ft.lbs. (25 N-m)
Fuel Pump Bracket To Tank 2.5 ft.lbs. (3.4 N-m)
Fuel Rail Mounting Bolts 13 ft.lbs. (18 N-m)
Fuel Tank Bracket Mounting Bolts 15 ft.lbs. (20 N-m)
Fuel Tank Drain Plug 9 ft.lbs. (12 N-m)
No.1 Fuel Pipe To Fuel Rail 29 ft.lbs. (39 N-m)
No.1 Fuel Pipe To Fuel Pipe Support 22 ft.lbs. (29 N-m)
No.2 Fuel Pipe To Fuel Rail 18 ft.lbs. (25 N-m)
Tank Strap Mounting Bolts 16 ft.lbs. (22 N-m)
Tank Strap Bracket Mounting Nuts 27 ft.lbs. (37 N-m)
Throttle Body To Intake Plenum Bolts 9 ft.lbs. (13 N-m)

TURBOCHARGER TIGHTENING TORQUE:

Oil Pipe To Cylinder Block (Bolt) 25 ft.lbs. (34 N-m)
Oil Pipe To Cylinder Block (Nut) 9 ft.lbs. (13 N-m)
Oil Pipe To Turbocharger 9 ft.lbs. (13 N-m)
Turbocharger To Exhaust Manifold 33 ft.lbs. (44 N-m)
Turbocharger To Turbine Outlet Elbow 32 ft.lbs. (43 N-m)
Turbo Stay To Turbocharger 59 ft.lbs. (79 N-m)
Turbo Stay To Engine Mounting Bracket 43 ft.lbs. (58 N-m)
Water Pipe To Turbocharger 5.4 ft.lbs. (7.4 N-m)