System Specifications

TIMING:

Base Ignition Timing 10° BTDC At Idle [1]
Advance Ignition Timing
A/T More Than 12° BTDC At Idle [1]
M/T More Than 16° BTDC At Idle [1]

[1] Refer to ADJUSTMENT PROCEDURES.

RESISTANCE:

EGR Gas Temperature Sensor [2]
At 50°C (122°F) 69.4-88.5K Ohms
At 100°C (212°F) 11.9-14.4K Ohms
At 150°C (302°F) 2.8-3.6K Ohms

[2] California only.

Oxygen Sensor Heater 3.0-3.6 Ohms

Cam Position Sensor:
G1 and G2 pickups 140-180 Ohms
NE pickup 140-180 Ohms

Ignition Coil:
Primary 0.24-0.30 Ohm
Secondary 9.2-12.4K Ohms

Coolant Temperature Sensor:
At -20°C (-4°F) 10-20K Ohms
At 0°C (32°F) 4-7K Ohms
At 20°C (68°F) 2-3K Ohms
At 40°C (104°F) 0.9-1.3K Ohms
At 60°C (140°F) 0.4-0.7K Ohms
At 80°C (176°F) 0.2-0.4K Ohms

Idle Speed Control (ISC) Valve:
Between terminals B1 and S1 or S3 10-30 Ohms
Between terminals B2 and S2 or S4 10-30 Ohms

Throttle Position Sensor:

CLEARANCE BETWEEN BETWEEN TERMINALS RESISTANCE
STOP SCREW AND LEVER

0mm (0in) VTA-E2 0.2-1.2K Ohms
0.50mm (.020in) IDL-E2 2.3K Ohms or less
0.90mm (.035in) IDL-E2 Infinity
Full Open VTA-E2 3.5-10.3K Ohms
-- VC-E2 4.25-8.25K Ohms

Air Flow Meter:

BETWEEN TERMINALS RESISTANCE

THA-E2

At -20°C (-4°F) 10-20K Ohms
At 0°C (32°F) 4-7K Ohms
At 20°C (68°F) 2-3K Ohms
At 40°C (104°F) 0.9-1.3K Ohms
At 60°C (140°F) 0.4-0.7K Ohms