Coupe (Left Side : Rear)

Figure 5:

Coupe (Left Side : Rear)

Note: Requires part number 00460-16040 (replacement plugs)

1. Remove (2) inner fender plugs and (1) lower quarter panel rubber plug and discard them. (Figure 5)

2. Insert (2) threaded inserts into the exposed inner fender holes and (1) new replacement plug into lower quarter hole provided in kit. (Figure 5)

3. Clean the surface where the mudguard will be installed (use a cleaner such as Toyota Bug & Tar Remover P/N 00289-1BT01 and a lint free rag - making sure surface is clean and dry).

4. Remove the protective backing from the butyl strip on the mudguard.

5. Place the mudguard into position; attach and secure it with
(2) 10 mm screws provided in kit.

6. Drill 1/8 inch diameter hole into the newly installed plug using the lower mudguard mounting tab as a guide (Figure 4). Use caution not to damage the mudguard.

7. Attach and secure lower mudguard tab with (1) 10 mm screw provided in kit.