Warranty - Flat Rate Manual Operation Codes Update
89toyota10Date: 09-26-89 No: 90-01
Subject: 1990 Toyota Flat Rate Manual
Attached for your use, please find a copy of the 1990 Toyota Flat Rate Manual. Please use the information in this manual for 1990 model year vehicles only. The flat rate operation codes for model years prior to 1990 must be obtained from the flat rate manual for the corresponding year.
Please note that operation code 120012 (engine overhaul) may not be used unless all recuired steps are completed (see page A-10 of the 1990 Flat Rate Manual). Please also note that operation code 420018 (tire rotation) is listed in this year's flat rate manual for your information only and is not covered under warranty.
The adjustment operations listed below and shown in the 1990 Flat Rate Manual are for YOUR INFORMATION ONLY. The operations are performed as part of the Pre-delivery service or are part of normal vehicle maintenance.
*These operations may be covered in the event that a dealer other than that which sold the vehicle performed the adjustment.
Additional quantities of the Manual may be ordered through the Dealer Support Material System. The material number is 00404-RM036-U.
Should you have any questions please contact the Dealer "800" Warranty Assistance Line.