II. Headlight Bulb Removal, Inspection and Installation

II. HEADLIGHT BULB REMOVAL, INSPECTION AND INSTALLATION PROCEDURE






1. Turn off the headlight switch.

2. Open the hood and unplug the connector while depressing the lock release.





3. Turn the bulb retaining ring counter-clockwise and take out the bulb.

CAUTION:
^ The bulb remains hot immediately after the headlights are turned off, so take care not to burn yourself on the bulb.





4. Confirm the manufacturer of the headlight bulb. If the bulb is not manufactured by KOITO, replace the bulb with one made by KOITO.





5. Reinstall the original or replacement KOITO bulb and the bulb retaining ring. Insert the connector.

NOTE:
^ Do not touch the bulb glass with your bare hands. If you do, clean the glass with alcohol and a clean rag.

^ Make sure the connector is fully locked.

^ Repeat the procedure with the other bulb.

^ If bulb is replaced, adjust aiming of the headlight beam.