Service Hints
C 1 CRUISE CONTROL ACTUATOR1-3: Approx. 2 K Ohms
5-4: Approx. 38 Ohms
C12 CRUISE CONTROL SW [COMB. SW]
10-9: Continuous with the main SW ON
4-9: Approx. 418 Ohms with the cancel SW ON
Approx. 198 Ohms with the Set/Coast SW ON
Approx. 68 Ohms with the Resume/Accel SW ON
C15 CRUISE CONTROL ECU
14-Ground: Approx. 12 Volts with the Ignition SW at ON position
1, 15-Ground: Always Approx. 12 Volts
3-Ground: Continuous with the parking brake lever pulled up (One Of The Cancel SW)
20-Ground: 4 Pulses with 1 rotation of the Rotor Shaft
18-Ground: Approx. 418 Ohms with the cancel SW ON in the control SW
Approx. 198 Ohms with the Set/Coast SW ON in the control SW
Approx. 68 Ohms with the Resume/Accel SW ON in the control SW.
13-Ground: Always continuous