ABS w/o Traction Control

Depressing Brake Pedal To Check Warning Light Code:

1. Using SST, connect terminals Tc and E1 of DLC2 or DLC1.
- SST 09843- 18020
2. Ignition Switch ON.
3. Clear the Diagnostic Trouble Code (DTC) stored in Electronic Control Unit (ECU) by depressing the Brake Pedal 8 or more times within 3 seconds.
4. Check that the warning light shows the normal code.
5. Remove the SST from the terminals of DLC2 or DLC1.
- SST 09843 - 18020

NOTE: Cancellation cannot be done by removing the battery cable or ECU-B fuse.