Service Hints

C 3 CRUISE CONTROL ACTUATOR
5-4: Approx. 38 Ohms

C11 CRUISE CONTROL SW (COMB. SW)
5-3: Continuity with the main SW ON
4-3: Approx. 418 Ohms with the cancel SW ON
Approx. 68 Ohms with the resume/accel SW ON
Approx. 198 Ohms with the set/coast SW ON

C13 CRUISE CONTROL ECU
14-GROUND: Approx. 12 Volts with the ignition SW at ON position
1, 15-GROUND: Always approx. 12 Volts
20-GROUND: 4 pulses with 1 rotation of the rotor shaft
18-GROUND: Approx. 418 Ohms with the cancel SW ON in the control SW
Approx. 198 Ohms with the set/coast SW ON in the control SW
Approx. 68 Ohms with the resume/accel SW ON in the control SW
13-GROUND: Always continuity