Bolt Inspection
Using vernier calipers, measure the tension portion diameter of the bolt.
Standard diameter: 7.2 - 7.3 mm (0.284 - 0.287 inch)
Minimum diameter: 7.0 mm (0.276 inch)
If the diameter is less than minimum, replace the bolt.
Using vernier calipers, measure the tension portion diameter of the bolt.
Standard diameter: 7.2 - 7.3 mm (0.284 - 0.287 inch)
Minimum diameter: 7.0 mm (0.276 inch)
If the diameter is less than minimum, replace the bolt.