Door/Trunk Ajar Indicator/Lamp: Testing and Inspection
OPEN DOOR WARNING INSPECTION1. INSPECT WARNING LIGHT
Disconnect the connector from the door courtesy switch, and ground terminal 1 on the wire harness side connector and check that the warning light lights up.
If the warning light does not light up, inspect the bulb or wire harness.
2. INSPECT DOOR COURTESY SWITCH OPERATION
b. Check that there is continuity between the terminal and switch body with the switch ON (switch pin released).
b. Check that there is no continuity between the terminal and switch body with the switch OFF (switch pin pushed).
If continuity is not as specified, replace the switch.