Front

1. Remove front wheel.
[Torque: 103 Nm (76 ft. lbs.)]





2. Disconnect lower suspension arm from lower ball joint. Remove the 2 nuts and bolt.
[Torque: 127 Nm (94 ft. lbs.)]
3. Remove lower suspension arm.





a. Remove the 2 bolts on the front side of the lower suspension arm.
[Torque: 206 Nm (152 ft. lbs.)]





b. Remove the bolt and nut on the rear side of the lower suspension arm.
[Torque: 206 Nm (152 ft. lbs.)]
c. Remove the lower suspension arm.
d. Remove the lower suspension arm bushing stopper from the lower suspension arm shaft.
4. Install in reverse order of removal, noting the torque specifications in brackets [ ].
5. After installation, check the front wheel alignment.