Front

REPLACEMENT
1. Remove left and right front wheels.
[Torque: 103 Nm (76 ft. lbs.)]





2. Remove left and right stabilizer bar links, by removing the 4 nuts and 2 links.
[Torque: 39 Nm (29 ft. lbs.)]

NOTE: If the ball joint turns together with the nut, use a 5 mm hexagon wrench to hold the stud.





3. Remove left and right brackets and bushings, by Removing the 4 bolts.
[Torque: 19 Nm (14 ft. lbs.)]

Installation Note: Install the bushing to the inside of the bushing on the stabilizer bar.

4. Remove the stabilizer bar from the left hand side.

CAUTION: Be careful not to damage the pressure feed tube.

5. Install in reverse order of removal, noting the torque specifications in brackets [ ].