Input Signal Check

INPUT SIGNAL CHECK

1. Output of Code.
For check No.1 - No.2
* Turn the ignition switch ON.
For check No.3
* Turn the ignition switch ON.
* Shift to D position.
For check No.4
* Jack up the vehicle.
* Start the engine.
* Shift to D position.







2. Press the control switch to SET/COAST or RES/ACC position and hold it down or hold it up (1).

3. Push the main switch on (2).
4. Check that the CRUISE MAIN indicator light blinks twice or 3 times repeatedly after 53 seconds.
5. Turn the SET/COAST or RES/ACC switch OFF.

Indication Code Chart:

6. Operate each switch as Listed in the table as shown.
7. Read the blinking pattern of the CRUISE MAIN indicator light.
8. After performing the check, turn the main switch OFF.


HINT: When 2 or more signals are input to the cruise control ECU, only the lowest-numbered code is displayed.