Compressor

Compressor Inspection


1. INSTALL MANIFOLD GAUGE SET
Manifold Gauge Installation/Removal

2. START ENGINE


3. INSPECT COMPRESSOR FOR METALLIC SOUND
Check that there is a metallic sound from the compressor when the A/C switch is turned on.
If metallic sound is heard, replace the compressor assembly.

4. INSPECT PRESSURE OF REFRIGERATION SYSTEM
See "REFRIGERANT SYSTEM INSPECTION WITH MANIFOLD GAUGE SET" Refrigerant System With Manifold Gauge Set


5. STOP ENGINE


6. INSPECT VISUALLY FOR LEAKAGE OF REFRIGERANT FROM SAFETY SEAL
Using a gas leak detector, check for leakage of refrigerant.

If there is any leakage, replace the compressor assembly.