Case, M/T

SERVICE SPECIFICATIONS
Drive In Depth:
Transmission Case Oil Seal 2.4 +/- 0.3 mm (0.094 +/- 0.012 in.)
Transaxle Case Oil Seal 1.9 +/- 0.3 mm (0.075 +/- 0.012 in.)

TORQUE SPECIFICATIONS
Transaxle Case:
To Transaxle Case Receiver 11 Nm (115 kgf/cm, 8 ft.lbs.)
To Transmission Case 29 Nm (300 kgf/cm, 22 ft.lbs.)
Transmission Case:
Control Lever Housing Support Bracket 11 Nm (115 kgf/cm, 8 ft.lbs.)
Selecting Bellcrank Assembly 25 Nm (250 kgf/cm, 18 ft.lbs.)
To Transaxle Case 29 Nm (300 kgf/cm, 22 ft.lbs.)
To Transmission Case Cover 18 Nm (185 kgf/cm, 13 ft.lbs.)