Differential, Manual Transaxle

SERVICE SPECIFICATIONS
Differential Side Gear Backlash 0.05-0.20 mm (0.0020-0.0079 in.)
Differential Side Bearing Preload At Starting:
New Bearing 0.8 - 1.6 Nm (8 - 16 kgf/cm, 6.9 - 13.9 in.lbs.)
Reused Bearing 0.5 - 1.0 Nm (5 - 10 kgf/cm, 4.3 - 8.7 in.lbs.)

TORQUE SPECIFICATIONS
Ring Gear To Differential Case 124 Nm (1260 kgf/cm, 91 ft.lbs.)