Output Shaft, M/T

SERVICE SPECIFICATIONS
Output Shaft:
Roller Bearing Journal Diameter:
Minimum 32.970 mm (1.2980 in.)
1st Gear Journal Diameter:
Minimum 37.970 mm (1.4949 in.)
2nd Gear Journal Diameter:
Minimum 31.970 mm (1.2587 in.)
Runout:
Maximum 0.05 mm (0.0020 in.)

TORQUE SPECIFICATIONS
Output Shaft:
Front Bearing Lock Plate Set Bolt 11 Nm (115 kgf/cm, 8 ft.lbs.)
Lock Nut 118 Nm (1200 kgf/cm, 87 ft.lbs.)