M/T Torque Data

SERVICE SPECIFICATIONS
Drive In Depth:
Control Shaft Cover Oil Seal 1.0-2.0 mm (0.039-0.079 in.)
Select Inner Lever Slotted Spring Pin 0 +/- 0.5 mm (0 +/- 0.020 in.)
No.1 Shift Inner Lever Slotted Spring Pin 0 +/- 0.5 mm (0 +/- 0.020 in.)
No.2 Shift Inner Lever Slotted Spring Pin 0 +/- 0.5 mm (0 +/- 0.020 in.)

TORQUE SPECIFICATIONS
Back-Up Light Switch 40 Nm (410 kgf/cm, 30 ft.lbs.)
Clutch Line Bracket To Transaxle 4.9 Nm (50 kgf/cm, 43 in.lbs.)
Clutch Release Cylinder To Transaxle 4.9 Nm (50 kgf/cm, 43 in.lbs.)
Clutch Release Fork Support 37 Nm (375 kgf/cm, 27 ft.lbs.)
Engine Left Mounting Bracket:
To Insulator 48 Nm (490 kgf/cm, 35 ft.lbs.)
Engine Rear Mounting Insulator:
To Bracket 64 Nm (650 kgf/cm, 47 ft.lbs.)
To Body 90 Nm (920 kgf/cm, 67 ft.lbs.)
Front Wheel 103 Nm (1050 kgf/cm, 76 ft.lbs.)
Front Exhaust Pipe:
To Exhaust Manifold 62 Nm (630 kgf/cm, 46 ft.lbs.)
To Exhaust Tail Pipe 19 Nm (190 kgf/cm, 14 ft.lbs.)
Intake Manifold Stay 20 Nm (200 kgf/cm, 14 ft.lbs.)
Lock Ball Assembly:
Straight Screw Plug 39 Nm (400 kgf/cm, 29 ft.lbs.)
No.1 Grommet Retainer To Body 4.4 Nm (45 kgf/cm, 39 in.lbs.)
No.2 Grommet Retainer To Body 4.9 Nm (50 kgf/cm, 43 in.lbs.)
Oil Receiver Pipe 17 Nm (175 kgf/cm, 13 ft.lbs.)
Speedometer Driven Gear 11 Nm (115 kgf/cm, 8 ft.lbs.)
Stabilizer Bar Bracket To Body 19 Nm (190 kgf/cm, 14 ft.lbs.)
Starter To Transaxle 39 Nm (400 kgf/cm, 29 ft.lbs.)
Steering Member Brace 78 Nm (800 kgf/cm, 58 ft.lbs.)
Transaxle To Engine:
17 mm Head 64 Nm (650 kgf/cm, 47 ft.lbs.)
14 mm Head A 46 Nm (470 kgf/cm, 34 ft.lbs.)
14 mm Head B 24 Nm (240 kgf/cm, 17 ft.lbs.)
10 mm Head 7.4 Nm (75 kgf/cm, 65 in. lbs.)