Gear: Application and ID

Gear thrust clearance:
1st:
Standard 0.10 - 0.40 mm (0.0039 - 0.0157 in.)
Maximum 0.45 mm (0.0177 in.)
2nd:
Standard 0.10 - 0.45 mm (0.0039 - 0.0177 in.)
Maximum 0.50 mm (0.0197 in.)
3rd:
Standard 0.10 - 0.35 mm (0.0039 - 0.0138 in.)
Maximum 0.40 mm (0.0157 in.)
4th:
Standard 0.10 - 0.55 mm (0.0039 - 0.0217 in.)
Maximum 0.60 mm (0.0236 in.)
5th:
Standard 0.10 - 0.57 mm (0.0039 - 0.0224 in.)
Maximum 0.65 mm (0.0256 in.)
Gear radial clearance:
1st:
Standard 0.015 - 0.058 mm (0.0006 - 0.0023 in.)
Maximum 0.070 mm (0.0028 in.)
2nd:
Standard 0.015 - 0.058 mm (0.0006 - 0.0023 in.)
Maximum 0.070 mm (0.0028 in.)
3rd:
Standard 0.015 - 0.058 mm (0.0006 - 0.0023 in.)
Maximum 0.070 mm (0.0028 in.)
4th:
Standard 0.015 - 0.058 mm (0.0006 - 0.0023 in.)
Maximum 0.070 mm (0.0028 in.)
5th:
Standard 0.015 - 0.058 mm (0.0006 - 0.0023 in.)
Maximum 0.070 mm (0.0028 in.)