Wheels and Tires: Testing and Inspection
TIRE AND WHEEL INSPECTION1. Inspect tires.
a. Check the tires for wear and for the proper inflation pressure.
Cold Tire Inflation Pressure
P205/65R15 92H: 220 kPa (32 psi)
b. Check the tire runout, it should be 1.0 mm (0.039 inch) or less.
2. Rotating tires.
NOTE: See the image for where to rotate each tire.
3. Inspect wheel balance.
a. Check and adjust the Off-The-Car balance.
b. If necessary, check and adjust the On-The-Car balance.
Unbalance After Adjustment: 8.0 g (0.018 lb) or less
4. Check wheel bearing looseness.
a. Check the backlash in the bearing shaft direction.
Maximum: 0.05 mm (0.0020 inch).
b. Check the axle hub deviation.
Maximum: 0.05 mm (0.0020 inch).
5. Check front suspension for looseness.
6. Check steering linkage for looseness.
7. Check ball joint for looseness.
8. Check shock absorber works properly.
- Check for oil leak
- Check mounting bushings for wear
- Bounce front and rear of the vehicle