Heater Core: Service and Repair
REMOVAL1. DRAIN ENGINE COOLANT
HINT: It is not necessary to drain out all the coolant.
2. REMOVE THESE PARTS:
a. Instrument panel
b. No.2 brace
3. REMOVE HEATER RADIATOR
a. Remove 2 screws and 2 clamps.
b. Remove the 2 screws and 2 clips, then disconnect the heater radiator pipes from heater radiator.
c. Remove 2 O-rings from heater radiator pipes.
HINT: At the time of installation, please refer to the following item.
Do not reuse 2 O-rings.
d. Pull out the heater radiator.
INSTALLATION
Installation is in the reverse order of removal.