Service Hints

C 3 CRUISE CONTROL ACTUATOR
3-4 : Approx. 38 Ohms

C11 CRUISE CONTROL SW (COMB. SW)
5-3 : Continuity with the main SW ON
4-3 : Approx. 418 Ohms with the cancel SW ON
Approx. 68 Ohms with the resume/accel SW ON
Approx. 198 Ohms with the set/coast SW ON

C13 CRUISE CONTROL ECU
9-GROUND : Approx. 12 Volts with the ignition SW at ON position
12-GROUND : 4 pulses with 1 rotation of the rotor shaft
10-GROUND : Approx. 418 Ohms with the cancel SW ON in the control SW
Approx. 198 Ohms with the set/coast SW ON in the control SW
Approx. 68 Ohms with the resume/accel SW ON in the control SW
16-GROUND : Always continuity