Cabin Temperature Sensor / Switch: Service and Repair

ROOM TEMPERATURE SENSOR REMOVAL (Automatic A/C)

REMOVAL

1. REMOVE THESE PARTS:
a. Front Door Scuff Plate LH
b. Cowl Side Trim LH

2. REMOVE ROOM TEMPERATURE SENSOR




a. Remove the 2 lower No.1 panel set screws.
b. Remove the 2 screws and food lock control lever, then disconnect the connector.
c. Pull the lower No.1 panel.




d. Disconnect the connector and aspirator hose.
e. Release the 2 claws and remove the sensor.

INSTALLATION

1. INSTALL ROOM TEMPERATURE SENSOR
a. Install the sensor to lower No.1 panel.
b. Connect the connector and aspirator hose.
c. Install the lower No.1 panel.

2. INSTALL THESE PARTS:
a. Cowl Side Trim LH
b. Front Door Scuff Plate LH