TC Terminal Circuit
Tc Terminal CircuitCIRCUIT DESCRIPTION
By connecting terminals Tc and E(1) of the [1][2]DLC1 the airbag sensor assembly is set in the DTC output mode.
The DTCs are displayed by blinking the SRS warning light.
Wiring Diagram:
Steps 1 - 2:
Steps 3 - 4:
INSPECTION PROCEDURE
If the DTC is not displayed, do the following troubleshooting.
Step 1 - Step 2:
INSPECTION PROCEDURE
If the DTC is displayed without a DTC check procedure, perform the following troubleshooting.