Windshield Washer Motor: Testing and Inspection

INSPECT WASHER LINKED OPERATION
a. Connect the positive (+) lead from the battery to terminal 16 and the negative (-) lead to terminal 2.
b. Connect the positive (+) lead from the voltmeter to terminal 7 and the negative (-) lead to terminal 2.
c. Push in the washer switch, and check that the voltage changes as shown in the chart.
If operation is not as specified, replace the wiper and washer switch.




INSPECT WASHER MOTOR OPERATION
Connect the positive (+) lead from the battery to terminal 2 and the negative (-) lead to terminal 1, check that the motor operates.

NOTE: These tests must be performed quickly (within 20 seconds) to prevent the coil from burning out.

If operation is not as specified, replace the motor.