Keyless Entry Transmitter Battery: Service and Repair
TRANSMITTER BATTERYREPLACEMENT
1. REPLACE TRANSMITTER BATTERY
NOTE: Special caution should be taken for handling each component as they are precision electronic components.
a. Using a screwdriver, remove the cover.
NOTE: Do not pry out the cover forcibly.
HINT: Tape the screwdriver tip before use.
b. Remove the battery (lithium battery).
NOTE:
- Do not push the terminals with a finger.
- If prying up the battery (lithium battery) forcibly to remove, the terminals are deformed.
c. Install a battery (lithium battery), as shown in the illustration.
NOTE:
- Face the battery upward.
- Take care not to deform the terminals.
d. Check that the rubber cover is not distorted or slipped off, and install the cover.
NOTE: It might cause faulty contact of battery (lithium battery) and terminals.