Backup Lamp: Service and Repair

BACK UP LAMP ASSY LH

REPLACEMENT

1. REMOVE BACK UP LAMP ASSY LH




a. Remove the service hole cover.

b. Remove the 2 nuts and disconnect the connector.




c. Using a moulding remover, remove the 2 clips and back up light assy LH.




2. INSTALL BACK UP LAMP ASSY LH
a. Set the 2 clips on the back up light assy LH as shown in the illustration.
b. Connect the connector.
c. Install the back up light LH with 2 nuts.