Airbag System

DIAGNOSTIC TROUBLE CODE CHART

B0100/13 - B0116/48:

B0117/45 - B1145/35:

B1156/B1157/15 - Normal:

If a trouble code or normal system code is displayed during the DTC check, check the circuit listed for that code in the table.

HINT:
- When the SRS warning light remains on and the DTC output is the normal system code, a voltage source drop is likely. This malfunction is not stored in the memory by the airbag sensor assembly. And if the power source voltage returns to normal, the SRS warning light will automatically go off.
- When 2 or more codes are indicated, the code with the lower number appears first.
- If a code is not listed on the displayed chart, the airbag sensor assembly may have failed.
- In the case of any malfunction concerning an open circuit, short to ground, or short to B+ due to a squib, another malfunction code may not be detected. In this case, repair the malfunction currently indicated and then perform malfunction diagnosis again.