Pinout Values and Diagnostic Parameters
TERMINALS OF ECUTerminals Of ECU:
1. INSPECT TVIP ECU
Pinouts:
a. Disconnect the TVIP ECU connector, and check each terminal of the disconnected connector.
If the result is not as specified, the vehicle's side may malfunction.
Pinouts:
1. Reconnect the connector and check the each terminals.
If the result is not as specified, the TVIP ECU may malfunction.
Terminals Of ECU:
2. INSPECT INTEGRATION RELAY
Pinouts:
a. Disconnect the connector and check the continuity of each terminal of the disconnected connector.
If the result is not as specified, the vehicle's side may malfunction.
Terminals Of ECU:
3. INSPECT INSTRUMENT PANEL J/B (INTEGRATION RELAY)
a. Inspect the DOOR fuse.
b. Disconnect the connector ID of the instrument panel J/B.
c. Check each terminal of the disconnected connector.
If the result is not as specified, the vehicle's side may malfunction.