Pinout Values and Diagnostic Parameters
TERMINALS OF ECUTerminals Of ECU:
1. INSPECT INTEGRATION RELAY
a. Disconnect the connector from the integration relay.
Pinouts:
b. Check the continuity between each terminal of the disconnected connector and the body ground, as shown in the illustration and table.
If the result is not as specified, the vehicle's side may malfunction.
Pinouts:
c. Reconnect the connector and check the voltage between each terminal and the body ground, as shown in the illustration and table.
If the result is not as specified, the integration relay may malfunction.
Terminals Of ECU:
2. INSPECT INSTRUMENTAL PANEL J/B (INTEGRATION RELAY)
a. Disconnect the connectors IA, IB, ID, IF, IH and IJ of the instrument panel J/B.
Pinouts:
b. Check the continuity between each terminal of the disconnected connectors and the body ground, as shown in the illustration and table.
If the result is not as specified, the vehicle's side may malfunction.
Pinouts:
c. Reconnect the connectors and check the voltage between each terminal and the body ground, as shown in the illustration and table.
If the result is not as specified, the integration relay or instrument panel J/B assembly may malfunction.