Map Light: Testing and Inspection

- MAP LAMP ASSY (W/ SLIDING ROOF)
(a) Measure the resistance according to the value(s) in the table provided.
(b) Connect the positive (+) lead from the battery to terminal 1 and the negative (-) lead to terminal 6, then check that the illumination comes on when switch operation is ON position.








- MAP LAMP ASSY (W/O SLIDING ROOF)
(a) Measure the resistance according to the value(s) in the table provided.
(b) Connect the positive (+) lead from the battery to terminal 1 and the negative (-) lead to terminal 3, then check that the illumination comes on when switch operation is ON position.








- MAP LAMP ASSY (ELECTRO CHROMIC MIRROR INNER MIRROR)
(a) Measure the resistance according to the value(s) in the table provided.
(b) Connect the positive (+) lead from the battery to terminal 1 and the negative (-) lead to terminal 6, then check that the illumination comes on when switch operation is ON position.