Outer Rear View Mirror

OUTER REAR VIEW MIRROR ASSEMBLY LH

REPLACEMENT

HINT:
- The installation procedures are the removal procedures in reverse order. However, only installation procedures requiring additional information are included.
- Use the same procedures for the RH side and LH side.

1. REMOVE FRONT DOOR PULL HANDLE LH
2. REMOVE POWER WINDOW REGULATOR MASTER SWITCH ASSEMBLY (W/ POWER WINDOW)
3. REMOVE FRONT ARMREST BASE PANEL UPPER LH (W/O POWER WINDOW)
4. REMOVE FRONT DOOR WINDOW REGULATOR HANDLE ASSEMBLY (W/O POWER WINDOW)
5. REMOVE FRONT DOOR LOWER FRAME BRACKET GARNISH LH
6. REMOVE FRONT DOOR TRIM BOARD SUB-ASSEMBLY LH
7. REMOVE OUTER REAR VIEW MIRROR ASSEMBLY LH
a. Remove the 3 nuts and the rear view mirror assembly LH, and then disconnect the connector.

8. INSTALL OUTER REAR VIEW MIRROR ASSEMBLY LH

Torque: 8.0 N.m (81 kgf.cm, 71 in.lbf)