Parking Brake System: Adjustments
ADJUSTMENT1. REMOVE REAR WHEEL
2. ADJUST PARKING BRAKE SHOE CLEARANCE
3. INSTALL REAR WHEEL
Torque: 103 Nm (1,050 kgf-cm, 76 ft. lbs.)
4. INSPECT PARKING BRAKE LEVER TRAVEL
a. Pull the parking brake lever all the way up, and count the number of clicks.
Parking brake lever travel: 6 to 9 clicks at 200 N (20 kgf, 44.1 lbs)
5. ADJUST PARKING BRAKE LEVER TRAVEL
a. Remove the shift lever knob sub-assy.
b. Remove the console upper rear panel sub-assy.
c. Remove the air duct rear No.1.
d. Loosen the lock nut and turn the parking brake wire adjusting nut until the lever travel is correct.
e. Using a spanner or equivalent to hold the parking brake adjusting nut, tighten the lock nut.
Torque: 5.0 Nm (51 kgf-cm, 44 inch lbs.)